Choosing aluminium windows comes down to four decisions: opening style, frame size, glazing specification and colour. Everything else is detail. This guide works through each one from an installer’s perspective, with the practical questions we ask on every survey.
Opening styles: which suits which room?
nnn
The opening style is the first decision because it affects everything downstream: frame size, hardware, cleaning access and how the room works. These are the four main types for residential use.
| Style | How it opens | Best for | Watch out for |
|---|---|---|---|
| Casement (side-hung) | Swings outward on a vertical hinge | Living rooms, bedrooms, ground floor | Needs clear space outside to open fully |
| Casement (top-hung) | Swings outward on a horizontal hinge at the top | High-level windows, kitchens above a worktop | Limited opening angle; not an escape route |
| Tilt and turn | Tilts inward at the top or turns inward fully | Upper floors, flats, rooms with restricted outside access | Needs clear floor space inside when in turn mode |
| Fixed (non-opening) | Does not open | Stairwells, feature glazing, alongside bifold doors | No ventilation; building regulations apply if replacing an escape window |
A common mistake is specifying top-hung casements throughout a house to save cost, then finding they cannot serve as escape windows on upper floors. Building regulations require bedrooms above ground floor to have at least one window with a clear opening of 0.33m², a minimum 450mm dimension, and a sill no more than 1,100mm from the floor. A tilt and turn window in turn mode meets this; a top-hung casement at a narrow opening angle often does not.
Frame size: sightlines and their practical effect
Sightline is the visible width of the frame between panes of glass. Aluminium frames run 65mm to 80mm wide on a standard casement. uPVC runs 100mm to 120mm. The difference is visible and meaningful in rooms where the window is a feature rather than a utility.
Slim sightlines matter most on:
- Corner windows where two panes meet at an angle — a thick uPVC frame at the corner looks clumsy; a slim aluminium one almost disappears.
- Large openings where the glass-to-frame ratio determines how much the view is interrupted.
- Flush casements in conservation areas, where the slim profile reads as a contemporary version of original timber windows.
- Windows alongside bifold or sliding doors, where visual consistency across the glazed elevation matters.
For a standard bedroom casement in a Victorian terrace, the frame size difference is less critical. uPVC works perfectly well and costs less.
Thermal break: what it is and why it matters
Aluminium conducts heat well, which works against insulation. A thermal break is a strip of low-conductivity material bonded between the inner and outer aluminium sections of the frame, breaking the path for heat to travel through. All aluminium windows for residential use in the UK must have a thermal break to meet building regulations.
The U-value of the frame measures how well it insulates. Building regulations for replacement windows require a whole-window U-value of 1.6 W/m²K or better. Modern thermally broken aluminium windows from reputable systems typically achieve 1.3 to 1.4 W/m²K on a standard double-glazed unit. The glass unit itself, not the frame, accounts for most of that figure.
Glazing options
| Option | What it does | When to choose it | Approx premium over standard |
|---|---|---|---|
| Standard double glazed, low-E coating, argon fill | Meets building regs, good insulation | Most domestic applications | Included in base price |
| Triple glazing | Adds a third pane and second air gap, lower U-value | North-facing rooms, high noise areas, Passivhaus projects | 20 to 25% more on the glass cost |
| Solar control glass | Reduces heat gain from sunlight | South or west-facing rooms prone to overheating | 10 to 15% more on the glass cost |
| Acoustic glass | Reduces sound transmission | Near busy roads or train lines | 15 to 25% more on the glass cost |
| Obscure glass | Provides privacy while transmitting light | Bathrooms, side returns, ground floor overlooked rooms | Minimal |
Triple glazing is worth the premium only where it solves a specific problem: excessive heat loss, noise, or compliance with a Passivhaus or low-energy standard. For most London homes with a south or west-facing rear extension, solar control glass on those windows is a better spend than triple glazing.
Colour and finish
Standard RAL colours — white, grey, anthracite grey, black, cream — are included in the base price on aluminium. The colour is powder coated onto the frame before assembly and lasts the life of the frame. No repainting, no fading.
A bespoke RAL colour not on the standard range adds around £80 to £150 per window. A dual-colour finish (different inside and outside) adds a similar amount. This is worth considering when the inside of a home is a different palette from the exterior — anthracite outside, white inside, for example.
Black aluminium windows have become one of the most requested finishes in London homes, particularly for extensions. They work against white render, London stock brick and grey concrete. See our black aluminium windows guide for more detail on styles, cost and conservation area considerations.
Flush casements: when and why
A flush casement sits flush with the outer face of the frame rather than projecting forward. The result is a flat, almost steel-look profile that is difficult to achieve in uPVC. Flush aluminium casements are increasingly specified in conservation areas and for period properties where the planning officer wants something sympathetic to original timber windows.
They cost around 10 to 15% more than a standard projecting casement because the tolerances are tighter. If you are replacing windows in a conservation area, it is worth asking us whether flush casements are likely to be required or preferred before the survey.
ALUNA systems: what it means for the finished window
Zeenee sources raw aluminium extrusions from ALUNA (Alunet Systems), one of the established UK aluminium systems houses. The finished window is fabricated in-house to your exact opening size. The ALUNA thermal break profiles meet current UK building regulations across all replacement window scenarios, and the hardware is designed for the profile rather than adapted from a different system.
Frequently asked questions about choosing aluminium windows
How do I know which opening style to choose?
Start with the room use and the floor. Ground floor: outward-opening casements work for most rooms unless space outside is tight. Upper floor bedrooms: check whether one window needs to serve as a building regulations escape route. If so, a tilt and turn or a large side-hung casement is the right call. High-level windows above a worktop or desk: top-hung casements are practical because they open without swinging into the room. Stairwells and feature positions: fixed windows keep the frame slimmest.
Are aluminium windows worth the extra cost over uPVC?
For most London homes where the windows are a visible part of the elevation and the property is likely to change hands, yes. The lifespan difference (45 years vs 25 to 30 years for uPVC) means the total cost over ownership is often lower for aluminium despite the higher upfront price. The slim frames also hold their resale value better in the London market. See our full aluminium vs uPVC windows comparison.
Can I mix casement and tilt and turn windows in the same house?
Yes, and it is common. Ground floor rooms typically use casements because outward-opening hardware is more robust and the cleaning question does not arise. Upper floors use tilt and turn where cleaning from inside is needed. We colour match and use the same frame depth throughout, so the elevation looks consistent.
What is a Secured by Design window?
Secured by Design is a police-backed initiative that specifies minimum security ratings for windows and doors. PAS 24 is the main standard, covering resistance to forced entry. Many aluminium window systems achieve PAS 24 as standard with the right hardware. If you are in an area with a high burglary rate or your insurer specifies it, ask us to confirm PAS 24 compliance at survey.
See also: aluminium windows London, how much aluminium windows cost, tilt and turn aluminium windows, black aluminium windows, and recent installations across London.
